Van shelving units

We build professional shelving units for vans and cars from an aluminium modular kit that we have adapted into a car shelving system for vans and commercial vehicles. You choose a ready-made example assembly in the e-shop, or choose entirely arbitrary made-to-measure dimensions in the form of custom racking.

We have supplied turnkey racking and conversions since 2009, and since 2019 we have used our own storage system in which, if damaged, only the individual shelf part is replaced, not the whole shelf.

Aluminium modular kit instead of fixed shelving

Our vehicle shelving unit is assembled from aluminium profiles in three sizes – 30, 40 and 45. Every profile has a clamping slot along its entire length, into which shelves, drawers, handles and your own additions can be anchored anywhere on the structure. The structure can be extended at any point with another shelving unit or just a profile, and we are not restricted by any fixed dimensional series.

So the shelving unit is not a finished product with fixed dimensions. Every part can be moved, enlarged, added or left out so that the assembly fits your cases and tools, and you can change it at any time later.

What types of shelving units you will find in the category


Where the shelving unit goes in the vehicle

A side shelving unit runs along the left or right wall of the cargo area. A shelving unit behind the cab stands directly behind the partition that separates the cab from the cargo area; unlike side shelving units, in some vehicles it has no upper block, and a lower block comes into consideration instead. The height of the assembly is limited by the vehicle's rear loading opening: the shelving unit is loaded into the vehicle through the rear doors and must fit through them.

Examples of use

The shelving unit is assembled according to what each person carries. An electrician needs organisers and cases for relatively light material, a plumber sorts pipes, fittings and seals, and anyone working with heavier tools reaches for steel drawers. What aluminium vehicle racking look like for individual trades is shown in the categories Van racking for electricians and Van racking for plumbers.

Professional installation and anchoring

Turnkey professional installation of the shelving unit is an optional service. You can order it from us, or assemble the shelving unit yourself; anyone who wants professional installation can have it in Prague, in Slavičín or at their own premises.

During professional installation, holes are drilled into reinforced parts of the vehicle body, that is, the side panels and the floor, in accordance with homologation requirements. Vans generally have very few original anchoring points, and a shelving unit built to the millimetre around your tools would not use them anyway. You will find details in the category Anchoring vehicle racking.

Ready-made assembly or custom order

The kit can be assembled from example assemblies directly in the e-shop, or you can choose entirely arbitrary made-to-measure dimensions in the form of custom racking, for example for the Mercedes Sprinter, Ford Transit, Fiat Ducato, Renault Trafic, VW Crafter and others. If you are looking for a solution for the whole vehicle including the floor, pull-outs and anchoring, see the parent category Van and car racking.

How to proceed with your choice


What work racking consists of

Racking is not one piece of furniture. It is a set of components that are combined as needed. It helps to know their names, because you will see them in our quotations and 3D designs too.

Load-bearing structure. A skeleton of aluminium profiles with a clamping slot along the full length. The slot makes it possible to fix anything anywhere without further drilling into the profile, so the assembly can be modified at any time. The basis is formed by the legs of the shelving unit and the crossmembers that hold the shelves and pull-outs.

Pull-out frames and platforms. Frames that slide out of the shelving unit, so you have access to the full depth of the shelf and do not have to reach into it. Our pull-outs have a spring lock: after being pushed in, the frame secures itself and does not slide out while driving.

Boxes, crates, Euro boxes and Systainers. Plastic crates of various sizes that slide into the pull-out frames. Different sizes can be combined in one assembly, so each column can be matched to its contents.

Steel drawers with locking. Sturdy drawers for heavier tools, parts and fasteners. There are universal ones that can be incorporated into any assembly, as well as TECNO drawer racking designed precisely for a specific vehicle model.

Shelf panels. The bottom, sides, back and front of the shelf. They are made of film-faced plywood, which is moisture-resistant and easy to clean, or of plastic, which is lighter and does not absorb water.

Work surface and workbench. A fold-down or fixed board for working directly in the vehicle. It can be combined with a pull-out vice, which slides out of the cargo area during work and slides back in after use.

Perforated panels and hangers. Sheet-metal panels with holes for hooks, on which you hang the tools you want in sight and right at hand.

Partition and dividing wall. Separates the cargo area from the cab. It protects the driver from the cargo shifting and at the same time defines the space for anchoring.

Floor, double floor and storage space in the floor. A protective floor protects the sheet metal, a double floor creates additional storage space and a pull-out platform makes it possible to pull heavy items out without climbing inside.

Removable additional load platform. A surface between the rear and side doors above the wheel arches, which is removed when you need to transport pallets or large cargo.

Pull-outs from the side doors and for bicycles. Individual pull-out frames for heavy and bulky items: generators, cases, bicycles or machines.

Anchoring elements and sets. Fasteners, feet and angle brackets with which the whole structure is anchored to the vehicle body.

Locks, handles, clips and holders. Small fittings that let drawers lock, boxes be carried, and ladders and long items stay in place so that nothing hangs loose.

Frequently asked questions

What happens if one part of the shelving unit is damaged?
Only the damaged shelf part is replaced, not the whole shelf. As a result, you pay for the repair of just one component instead of a new shelf.

How tall a shelving unit can be built into a car or van?
The main limit is the rear loading opening of the vehicle: the unit is loaded through the rear doors, so it has to fit through them. We therefore always design the specific height to suit your vehicle.

Can the shelving unit be extended later or fitted with your own elements?
Yes. Every profile has a clamping slot along its entire length, so you can extend the structure at any point with another shelving unit or just a profile, and you can also add your own elements to it yourself.

Does professional installation of the shelving unit involve drilling into the vehicle body?
Yes. Drilling is done into the reinforced parts of the vehicle body, in line with type-approval requirements; the original anchor points are not used for custom shelving units.

Zadejte nám nezávaznou poptávku:

Napište nám, ozveme se vám na uvedený e-mail.

Přílohy, skica, apod.: Každý soubor nejvýše 2 MB, nejvýše 3 soubory.