Mercedes van racking

We build the aluminium profile shelving system in the same way for the Mercedes Vito and for its electric version, the eVito, and we adapt it in the same way for the Sprinter. It is never a finished part with fixed dimensions, but racking to the millimetre around what you actually carry and which tools you need to have to hand.

Below you will find what distinguishes the versions of the Vito and the Sprinter.

Vito and eVito: the same build, a difference in version

We list Vito bodies from 2014 in the Compact, Long and Extra Long versions, with the Mixto Long and Mixto Extra Long variants. The electric eVito is listed as Long and Extra Long. The racking principle is the same for the Vito and the eVito; only the vehicle body the shelving unit goes into differs.

An overview of the available variants for a specific vehicle version can be found on the page Mercedes Vito van racking.

Sprinter: the year of manufacture and the drive decide

For the Sprinter, the bodies are divided by generation:

  • up to 2018 – designation 906, lengths L1 to L4 and heights H1 to H3,
  • from 2018 – versions with front-wheel drive (910) and with rear-wheel drive or all-wheel drive (907),
  • electric eSprinter – front-wheel drive from 2019, rear-wheel drive from 2023.

Before choosing, therefore, go by the year of manufacture, the drive and the length and height designation of your vehicle. The wheelbase can differ for the same length depending on the drive.

Floor storage and pull-outs

In vehicles with a low chassis, such as the Sprinter, usable space arises in the floor where you need to keep the maximum size of the load platform above it. Euro boxes on pull-outs, in a layout of your choice, are practical.

For heavier equipment, such as power generators, individual pull-outs from the floor or from the side door are suitable. We design the layout from a 3D model based on your specification – a hand sketch or a simple description is enough.

Additional load platform and pull-out floor

Another option is a removable additional load platform between the rear and side doors, above the wheel arches: it can be divided with partitions and any load capacity can be specified for it. We make the pull-out floor exactly to your specification, and it can also be combined with existing racking, for example as an additional pull-out for a bicycle.

An example assembly, or a custom order

Treat the ready-made assemblies as a starting point: you can modify them, or choose completely arbitrary dimensions made to measure as custom racking. The custom route is particularly suitable for the Mercedes Sprinter. Further specific variants will be added by product cards as they are completed.

Professional installation and anchoring

In both the Vito and the Sprinter, the structure is anchored to reinforced parts of the vehicle body, i.e. the side panels and floor. Professional installation therefore includes drilling into these places in line with type-approval requirements; there are very few original anchor points in vans. After professional installation, an entry is made in the vehicle's electronic technical certificate (ISTP of the Ministry of Transport).

Professional installation is optional. We will carry it out in Prague, in Slavičín in the Zlín region or at your premises, but you can also do it yourself.

Zadejte nám nezávaznou poptávku:

Napište nám, ozveme se vám na uvedený e-mail.

Přílohy, skica, apod.: Každý soubor nejvýše 2 MB, nejvýše 3 soubory.