How to connect aluminium profiles

Aluminium profiles with a slot are joined with screws and connecting parts, without welding. Below is an overview of the ways to join them, the assembly procedure and what is worth checking before you order.

Check the slot first

Profiles can be joined directly only within the same slot range (6, 8 or 10 mm). Connecting parts are made for a specific slot size, so choose the profile first and then the fasteners for its slot. The ranges are in the categories 6 mm slot, 8 mm slot and 10 mm slot.

Ways of joining profiles

  • Angle bracket. An L-shaped connector that is screwed into the slots of both profiles using T-nuts. It needs no machining of the profile and is the fastest and easiest joint to adjust.
  • Corner connector. It joins two or three profiles at a corner and tends to be stronger than an angle bracket. Corner connectors come in standard, narrow and large sizes. Three-way corner connectors join three profiles at one point, for example at the corner of a frame or at a table leg.
  • Cube connector. It joins profiles at a right angle. For maximum strength and a barely visible joint, choose cube connectors or internal connectors.
  • Internal connector. It is hidden inside the profile, so it is almost invisible. It requires drilled holes and a thread at the ends of the profile, and drilling jigs help with the drilling.
  • Connecting plate. A flat connecting plate for T-joints, cross joints and corner joints. It spreads the force over a larger area.

T-nuts and T-bolts

Angle brackets, corner connectors and other parts are fixed into the slot using T-nuts and T-bolts. A classic nut is slid in from the end of the profile. A twist-in nut can be placed into the slot anywhere along its length and locked by turning it, so it suits later changes to a finished structure. With T-bolts, follow the recommended tightening torque and check them after the joint has been loaded.

Friction joint and form-fit joint

In a friction joint the parts are held together only by friction between the surfaces, so under a large force the joint can shift. In a form-fit joint the force is transferred by shape, for example the tab of an angle bracket engages in the slot. For heavier and dynamically loaded structures, joints that transfer force by shape are worthwhile, or should be added.

Assembly procedure

  1. Plan the layout and insert the nuts into the slots before joining the profiles, if they can only be slid in from the end.
  2. Assemble the frame loosely and check squareness and right angles.
  3. Tighten the joints, the main load-bearing ones first.
  4. Add bracing and accessories.
  5. Fit the end caps and slot cover strips and level the feet.

Aluminium and other metals

Aluminium is durable in normal environments. Care is needed when it is joined to other metals: in damp conditions aluminium in contact with stainless steel can corrode. In aggressive or damp environments, insulating washers or seals and suitable fasteners are therefore used.

Assembly by us or by yourself

Professional assembly is an optional service. You can have the structure assembled by us, or assemble it yourself. The guide Structure assembly describes a single joint step by step. All the parts are in the category Fasteners.

Frequently asked questions

How do I join two aluminium profiles at a right angle?
With an angle bracket and T-nuts, a corner connector, a cube connector or an internal connector. An angle bracket needs no machining of the profile; an internal connector is almost invisible but requires drilled holes.

Can profiles with different slot sizes be joined?
Not directly. Profiles can be joined only within the same slot range (6, 8 or 10 mm), and connecting parts are made for a specific slot size.

Does the profile have to be drilled to join it?
Not with angle brackets and T-nuts in the slot. Internal connectors and joints through the end faces of the profile require drilled holes and a thread at the profile ends.

Can I assemble the structure myself?
Yes. Professional assembly is an optional service, and the structure can also be assembled yourself following the guide Structure assembly.

Zadejte nám nezávaznou poptávku:

Napište nám, ozveme se vám na uvedený e-mail.

Přílohy, skica, apod.: Každý soubor nejvýše 2 MB, nejvýše 3 soubory.