Safety guard fencing

We make safety guard fencing from aluminium profiles to order and without limitation by size ranges. It suits enclosing machines and assembly lines according to the safety requirements of your operation. We adapt the height, the length of the panels and the mesh size to what you need to enclose. Thanks to the slot system, the fencing can be extended or modified at any time as your operation changes. You can design a fence, a cover or an enclosed cell yourself in the 3D generator (configurator): you choose the dimensions, the sides with a wall or a door, the roof and the infill.

Safety protective fencing

What protective fencing is for

Protective fencing separates people from the dangerous part of a machine: moving parts, a robot, a press or equipment that might start up unexpectedly. It is often the first and most visible safety measure in production. Well-designed fencing does not get in the way of work; it guides people to where it is safe.

Fencing without size ranges

We make safety protective fencing to measure according to your needs. We are not limited by any size ranges: the fencing can be any height and its walls any length. The last wall section can be made to the millimetre, so the fencing adapts to the space you are enclosing, and not the other way round.

What the fencing is made of

  • Posts: the basis is aluminium profiles 45×45 or 45×90 mm, but even that is not a requirement.
  • Infill frames: aluminium profiles 30×30 mm.
  • Mesh: ribbed mesh 50×30 mm made of galvanised wire 3.1 mm in diameter.
  • Crossbars and feet: posts and crossbars hold the whole structure together, and the feet are used to anchor it to the floor.

The 45×45 and 45×90 mm profiles belong to the strongest range with a 10 mm slot, and frames made of 30×30 mm profile to the universal range with an 8 mm slot. Each range has its own connecting accessories designed precisely for its slot size, so if you choose different profiles, it is the slot that has to be checked.

Infills: mesh or solid wall

The mesh size can be changed. Ribbed mesh leaves the view of the enclosed equipment open, whereas solid infills hide it. Instead of mesh, the walls can be filled with, for example, polycarbonate, plywood or PP-C plastic sheets. What goes into the infill depends on what you need the fencing to do.

Doors and accessories

Fencing doors can be hinged or sliding, with hardware and locks, or prepared for a safety switch. For lines where a trolley passes through, doors without a threshold are used.

We are preparing hinged and sliding doors and further accessories for the fencing. If you need them, say so in your enquiry so that we can tell you the current status.

Safety requirements for protective fencing

Fixed and movable guards

Guards fall into two groups. A fixed guard can be removed only with tools and is not expected to be opened for normal operation. It suits places that are entered rarely. A movable guard, typically a door, is opened for routine access and must be linked to a safety function so that the machine stops when it is opened, or so that it cannot be opened until the hazardous movement has ended. Choosing the right type of guard is a decision that requires a risk assessment of the specific machine.

How high and how far

For a person not to reach the hazardous point with their hands or feet, the fencing must have the right height, the right distance from the hazardous point and sufficiently small openings in the infill. The principles are set by the standard on safety distances to prevent danger zones being reached by the upper and lower limbs (ISO 13857). The larger the mesh openings, the further from the hazardous point the fencing must be. The gap between the floor and the lower edge of the guard is also limited, and low fencing without additional measures is not enough. The exact dimensions always follow from the standard and the specific machine, which is why we do not state them in the text.

Resistance and infill materials

A guard must withstand impact too, for example from a part or tool thrown off the machine. Requirements for the design and selection of fixed and movable guards are described in ISO 14120. The infill is chosen according to the risk: wire mesh and grilles protect while still allowing a view inside, polycarbonate allows visibility and protects against swarf and liquids, and solid sheet metal dampens noise and retains dust. When working with electronics, infills with antistatic properties are used.

Interlocking and locking of guards

The guard door needs to be connected to the machine control so that the machine stops when it is opened and cannot be started while the door is open. Safety components serve this purpose: switches, guard locks and emergency stops that stop the machine when the fencing is opened. The principles for the design and selection of these interlocking devices are described in ISO 14119. A guard lock is used where an operator can reach the danger zone before the hazard has ceased. The safety switch and the control system are, however, part of the safety solution of the machine as a whole.

Fencing around robots and cobots

Robot workstations are fenced in whole or in part, and entry is usually protected by interlocked doors and light curtains. With collaborative robots (cobots), safety is also addressed by limiting force and speed, but fencing is often used as a supplement, especially where the robot handles a hazardous tool. After a change to the robot program, safety must be assessed again.

Who is responsible for what

Safety of the machine as a whole rests with whoever places the machine or workstation on the market or into service, i.e. the machine builder or integrator. Protective fencing is one of its components. We supply the fencing structure: the frame, the infills and doors prepared for switches. Designing the safety functions and the risk assessment remain with whoever is responsible for the workstation.

Legislation and standards in brief

Machinery safety in the European Union has so far been governed by the Machinery Directive, which will be replaced from January 2027 by the Machinery Regulation. The Regulation applies directly in all member states and clarifies, for example, the concept of substantial modification, which matters for reconfigurable lines and fencing. The basis for risk assessment is ISO 12100. For robot workstations the related standard ISO 10218 applies. Standards are updated continually, so always check them in their current version before a project.

Extension and rebuilding

Fencing made of slotted profiles can be extended with further bays, doors can be added, the infill changed, or the fencing relocated when the layout of the hall changes. With every substantial change, however, safety needs to be assessed again, and not just a part added.

Professional assembly of fencing

We can assemble the fencing for you, but we do not have to: professional assembly is an optional service. Walls made of profiles are put together mechanically, with screws and connecting accessories, so you can also assemble them yourself following the Structure assembly instructions.

Fencing, cover and cell in the 3D generator

You set the frame profile, dimensions, sides, roof, infill, doors and feet in the 3D generator (configurator) and see the structure in 3D straight away. A single straight side without a roof gives plain fencing; several sides with a roof give a cover or a cell.

How to enquire about fencing

In your enquiry, state:

  • what the fencing is for and what it protects,
  • which machine or line the fencing encloses,
  • where the machine or robot is entered,
  • the dimensions of the space and the required height,
  • photographs of the site or machine,
  • what infill you want (mesh, polycarbonate, plywood, plastic sheets),
  • requirements for the infill: visibility, noise, cleanliness, ESD,
  • whether you expect hinged or sliding doors,
  • whether the fencing will be changed or extended later.

On that basis we will design the posts, the infills and the mesh size.

Send us your brief. A description of the use, the dimensions and a sketch are enough. We will design the structure and show you a 3D model.

Frequently asked questions

What fence infill panels do you offer?
Frames made of 30×30 mm aluminium profiles with ribbed mesh of 50×30 mm made of galvanised wire 3.1 mm in diameter. The infill can also be polycarbonate, plywood or PP-C plastic sheets.

How tall and how long can the fence be?
The fence can be of any height and the walls of any length. The last section is made to measure to the millimetre.

How tall should a protective fence be and how far from the hazard?
The height and the distance from the hazard are determined by the standard on safety distances (ISO 13857) and by the specific machine. The larger the mesh openings, the farther from the hazard the fence must be. That is why we give the rules, not a universal number.

What is the difference between a fixed and a movable guard?
A fixed guard can be removed only with tools and is not expected to be opened for routine operation. A movable guard, typically a door, opens for regular access and must be linked to a safety function so that the machine stops when it is opened, or cannot be opened until the hazardous movement has ended.

Zadejte nám nezávaznou poptávku:

Napište nám, ozveme se vám na uvedený e-mail.

Přílohy, skica, apod.: Každý soubor nejvýše 2 MB, nejvýše 3 soubory.