Volkswagen van racking
We build Volkswagen racking from the same modular aluminium kit as for other makes, whether it is the Caddy, Transporter or Crafter. The dimensions of the assembly are not fixed – any part can be moved, enlarged or left out so that the shelving unit fits your cases and tools exactly.
For each model you will find an overview of the versions by specific vehicle version.
Podkategorie
Produkty
Videa
Caddy, Transporter and Crafter
For Volkswagen we distinguish three model lines, each with its own sequence of generations:
- Caddy – the older Caddy and Caddy Maxi up to 2020, Caddy Cargo and Cargo Maxi from 2021 and the Cargo PHEV version from 2024.
- Transporter – T6 up to 2023 (L1, L2 and Kombi Crew Van) and the newer T7 from 2024, in versions including L1H1, L2H1 and Twin Cab.
- Crafter – from 2017 in lengths L3 to L5 and heights H2 to H4, with front-wheel or rear-wheel drive.
The year of manufacture therefore matters as much as the body length: older and newer generations are listed separately.
How to narrow down the choice
- Choose the model: Caddy, Transporter or Crafter.
- Determine the generation by year of manufacture, for example T6 up to 2023 or T7 from 2024.
- Find out the body length (L) and height (H) designation; for the Crafter also whether it has front-wheel or rear-wheel drive.
- Then select the matching version on the model page.
Move, enlarge, leave out
The assembly you see on the card is not the final form. You can move parts according to what you carry, enlarge them for bulkier cases and leave out those you do not need. The aim is not a ready-made shelving unit from a catalogue, but a shelving unit into which your cases with tools fit exactly.
- The clamping slot along the full length of the profile holds shelves, dividers and your own add-ons and lets you relocate them after installation.
- The racking can be extended in all directions if your equipment changes.
Where the shelving stands in the vehicle
The shelving runs along the left or right side wall of the cargo area, or stands directly behind the bulkhead that separates the cab from the cargo section.
Steel drawers: universal and made for the vehicle
Steel drawers with locking are a universal component of the kit: they can be built into any assembly regardless of the specific vehicle model. TECNO drawer racking go the opposite way and are designed precisely for a specific commercial vehicle model.
Ready-made assembly or custom order
For the Caddy Cargo Maxi you will already find a ready-made assembly; for other models, specific versions are being added gradually. If you do not want to wait, choose entirely arbitrary made-to-measure dimensions in the form of custom racking – which suits, for example, the Volkswagen Crafter.
Professional installation by us, or DIY
The shelving is designed as a modular kit of aluminium profiles, so you can assemble it yourself after delivery. If you order professional installation, we carry it out in Prague, in Slavičín in the Zlín region or directly at your premises.
Whoever does it, the structure is anchored to reinforced parts of the body, that is the side panels and floor. Professional installation involves drilling into these locations in line with homologation requirements; vans have very few original anchor points. The entry in the vehicle's electronic technical certificate (ISTP of the Ministry of Transport) is made only after professional installation.
Zadejte nám nezávaznou poptávku:
Napište nám, ozveme se vám na uvedený e-mail.












