Ducato, Jumper, Boxer van racking

The Fiat Ducato, Citroën Jumper and Peugeot Boxer share the same platform, which is why we offer an identical shelving system for them, adapted to the individual vehicle body versions, for example L1H1, L1H2 and other combinations of length and height. We build the made-to-measure racking to the millimetre around what you carry in the vehicle.

One platform, one shelving system

The three vehicles built on the same platform have an identical shelving system. They differ by the side on which the shelving unit stands and by the body version, that is, by the combination of the vehicle's length and height. The letter L stands for length, the letter H for the height of the vehicle.

Side and body version

  • left side of the vehicle – for example versions L1H1, L1H2, L2H2, L3H2 and L4H2,
  • right side of the vehicle – the same range of versions,
  • shelving unit for the bulkhead behind the cab – for vehicle height H1 and H2.

We adapt the shelving unit to the actual dimensions of your vehicle according to the side and version that match it.

Made-to-measure adjustments within the system

An identical system does not mean an identical shelving unit. The dimensions are not fixed: we arrange the drawers, Euro boxes and shelves according to what you carry, and the assembly can be modified, rebuilt or extended so that it fits your tools and cases.

The smaller siblings: Fiat Doblò and Citroën Jumpy

The smaller siblings of these vehicles, the Fiat Doblò and Citroën Jumpy, have their own dimensional range, so the same shelving system does not apply to them. The solution for them is based on the lighter System 30; you will find ready-made assemblies in the categories Euro box shelving unit and Van racking by vehicle.

Professional installation and registration in the electronic technical certificate (ISTP of the Ministry of Transport)

Professional installation is an optional service. We carry it out in Prague, in Slavičín or at your premises, or you assemble the structure yourself. The shelving unit is attached by drilling into the side panels and the floor, that is, into reinforced parts of the body, in compliance with type-approval requirements.

After professional installation, the racking is registered in the electronic technical certificate (ISTP of the Ministry of Transport) under type-approval number HP-0579.

Frequently asked questions

Can the shelving unit be adapted to the tools I carry?
Yes. The system is the same, but we adapt the arrangement of drawers, Euro boxes and shelves to your tools and cases to the millimetre, and the assembly can be modified or rebuilt later.

Is the racking entered in the electronic technical certificate?
Yes, after professional installation an entry is made in the electronic technical certificate (ISTP of the Ministry of Transport) under type-approval number HP-0579.

Does professional installation involve drilling into the vehicle body?
Yes. Anchoring the shelving unit means drilling into reinforced parts of the body and is governed by type-approval requirements. Original anchor points are not used for made-to-measure racking.

Zadejte nám nezávaznou poptávku:

Napište nám, ozveme se vám na uvedený e-mail.

Přílohy, skica, apod.: Každý soubor nejvýše 2 MB, nejvýše 3 soubory.